Original before. Original once more. Original before. Original once more.
Menu
HKS Acura RSX

HKS USA’s Acura RSX Type S: Free With Admission

Originally published: Nov 20, 2026 Words & Photos by Jason Siu

Of every car I photographed for Modified Magazine, this is probably the one the most people saw, and not because of newsstand sales. Modified was the primary media sponsor of SEMA 2005, which meant the December 2005 issue, featuring HKS USA’s Acura RSX Type S on the cover, was stacked in bins throughout the Las Vegas Convention Center and handed out for free, with signage to match. If you attended the show that year, there’s a good chance you picked up a copy and left it in your hotel room at the end of the day. Twenty-one years later, the shoot behind that cover is finally getting a permanent home here.

The car was HKS USA’s demo RSX, a 2002 Type S built to showcase the company’s turbo system and supporting performance parts for Honda’s K-series engine. The setup included an HKS GT2835 turbocharger, exhaust manifold, straight-through downpipe, S-Type intercooler, SSQV blow-off valve, and strengthened wastegate actuator, along with a Super Mega Flow intake and Turbo Hi-Power exhaust. Fuel upgrades consisted of HKS SPL injectors, a fuel pump, and a return system with an adjustable fuel pressure regulator. The engine bay also featured HKS’s Circle Earth grounding system, Super Fire iridium spark plugs, limited edition radiator and oil caps, and SPL dry carbon intake manifold and spark plug covers.

HKS Acura RSX
Photo by: Jason Siu

Engine management came from an HKS F-Con V Pro, working with an EVC boost controller and A/F Knock Amp. Running VP 100-octane fuel at 17.4 psi, the RSX produced 350.9 whp and 289.5 lb-ft of torque on the dyno. The original story made a point of calling out the torque figure, which was particularly impressive for a Honda 2.0-liter four-cylinder at the time.

An ACT Xtreme clutch and Quaife limited-slip differential handled the drivetrain, while HKS Hipermax RS coilovers and Hotchkis sway bars took care of the suspension. The wheels were 19×8-inch RH Pro R5s wrapped in 235/30R19 Nitto NT555 tires, filling the wheel wells with very little room to spare. Behind them sat a Brembo GT front brake kit with 13-inch cross-drilled two-piece rotors. The exterior featured an Ings+1 aero kit, a C-West aluminum GT wing, paint by MOB Works, and vinyl graphics by Euphoric Designs. HKS USA’s website address was prominently displayed along the sides, leaving no question about the car’s purpose.

HKS Acura RSX
Photo by: Jason Siu

Inside, the modifications were relatively simple compared to what was under the hood. A pair of Bride BRIX II seats replaced the factory seats, while HKS supplied a limited edition shift knob, turbo timer, and RS meters monitoring boost, oil temperature, and oil pressure. It was a straightforward interior for a demo car that was primarily built to show what HKS could do with the RSX platform.

Looking back, there were plenty of memorable demo cars in 2005, but this one had a few things going for it. A K20 making more than 350 whp was impressive at the time, HKS USA was a major name in the import performance industry, and Modified had a cover car that would be seen by hundreds of thousands of people attending SEMA. It’s not every day that one of your shoots ends up being handed out across an entire convention center, and that’s what makes this particular shoot worth revisiting.

From the Shop

Shop All
Support usCheck out our merch Shop